GAP/CL-20高能固体推进剂燃烧性能影响因素

采用水下声发射法测试了推进剂静态燃速,用线性回归法计算了推进剂燃速压强指数;研究了GAP/CL-20高能固体推进剂中增塑比及固体组分AP、CL-20、Al粉粒度等配方组成因素对燃烧性能的影响。研究结果表明,增塑比一定范围内的变化不会对推进剂燃烧性能产生显著影响,其燃速和燃速压强指数基本不变;CL-20粒度减小或AP粒度增加均会导致燃速不同程度的降低,Al粒度减小也会使燃速减小,但在达到一定程度后,燃速又增加;推进剂燃速压强指数随CL-20、Al粉粒度减小和AP粒度增加而减小,并对其燃烧性能的影响机制进行了简单分析。     

用腐蚀损伤计算金属日历寿命的原理和模型

通过对金属腐蚀T-H曲线和温湿谱的腐蚀损伤研究,找到一种用腐蚀损伤计算金属日历寿命的原理和模型。这种计算金属日历寿命的模型,只要给出真实使用环境下的腐蚀T-H曲线和温湿谱,就可计算出金属真实使用日历寿命。通过对30CrMnSiA钢的日历寿命实例计算结果与真实环境下的腐蚀试验结果的比较得到,相对误差是17.5%,这说明该日历寿命计算模型和方法是有效的。     

纺丝工艺对炭纤维缠绕复合材料强度转化率的影响

通过不同纺丝工艺的聚丙烯腈基炭纤维表面状态、NOL环及Φ150 mm容器的实验研究,分析了不同纺丝工艺对湿法缠绕复合材料聚丙烯腈基炭纤维强度转化率的影响。结果表明,干喷湿纺炭纤维比湿法纺丝Φ150 mm容器环向纤维强度转化率要高出11.9%~15.4%,湿法纺丝的炭纤维复合材料NOL环层间剪切强度要比干喷湿纺炭纤维复合材料高7.4~34.1 MPa。因此,干喷湿纺的炭纤维可应用于固体火箭发动机缠绕壳体、压力容器等主要承受拉伸应力的领域,可充分发挥其纤维强度;而湿法纺丝工艺制成的炭纤维与树脂基体结合紧密,利于载荷的传递,可应用于承受压缩剪切等复杂载荷的领域,从而发挥这两种纤维各自不同优势。     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Vegetable oil can be used as a base oil in minimal quantity of lubrication(MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force,and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grinding temperature, and energy ratio coefficient of MQL grinding were compared among the seven vegetable oil types. Results revealed that(1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding temperature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less viscous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid; and(7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force,87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7% energy ratio coefficient.     

G-16EP通用航空电瓶充放电及寿命研究

为了对G-16EP型电瓶进行维护和保养，根据电瓶厂家规定和适航规范，总结了该型电瓶的充电和容量测试（放电）方法，指出了影响电瓶寿命的主要因素，为该型号电瓶的维护提供了参考。     

PWM变频器供电的感应电机传热特性

为了探究电动机在脉宽调(Pulse width modulation，PWM)变频器供电下的传热特性，近一步揭示变频参数（调制比）对电动机温升分 布的影响特征,以一台采用PWM变频器供电下55 kW驱动用感应电机为例，基于流体力学及传热学基本原理，结合电机通风结构特征，建立外部包裹有空气域的三维流热耦合求解域模型，并采用有限体积元法对电机内的温度场进行了数值研究。此外，针对PWM不同调制比控制条件下电动机全域内的传热特性进行了对比分析，结果表明：两个不同调制比控制条件下电机求解域 内各主要部件温升分布趋势大致相同；径向上，转子部分温升较高，在气隙位置温升出现阶跃式变化，定子部分温升较低；轴向上，电机各部分近风端温升较低，远风端温升较高；周向上，定子轭部温升呈波浪式变化。     

分数槽集中绕组永磁同步电机设计与分析

分数槽集中绕组永磁同步电机由于转矩密度高、弱磁性能好、齿槽转矩小和效率高等特点,广泛应用于航空航天、电动汽车等领域。本文研究了机载雷达伺服系统用分数槽集中绕组永磁同步电机,建立了电机的解析模型,分析了长径比、裂比、磁密系数等设计参数对电机性能的影响规律。结果表明,电机的输出转矩和质量分别与定子外径D3os,D2os成正比,绕组端部比重与长径比λ成反比,综合转矩密度和绕组端部比重两个因素,λ宜在0.2~0.4范围内选择。当定子裂比γ增加时,转矩密度先增大后减小,为使转矩密度最大,γ宜在0.6~0.8范围内选择。当磁密系数χ增加时,输出转矩先增大后减小,为使输出转矩最大,χ宜设计在1.75附近。基于理论分析和仿真计算,文中设计并加工了一台45槽38极分数槽集中绕组永磁同步电机,最后通过实验测试了其性能。     

大型空间环境模拟器热沉气氮调温系统设计与实现

文章结合某型号航天器对调温热沉试验需求,对国内外气氮调温系统进行分析调研,对某空间环境模拟器进行了气氮调温系统流程设计,对影响系统的关键参数如气氮流量、液氮体积流量及有关供气供热管径等进行分析研究和设计实施,并进行了系统调试。调试结果表明,热沉温度均匀性达到±5℃,升/降温速率均达到或超过1℃/min,满足相应的型号试验要求。     

圆心松弛的圆环格点阵及其灵敏度优化研究

针对目前综合孔径辐射计圆环格点阵圆心位置固定,不能最大程度利用圆环中可布阵区域的问题,提出圆环格点阵圆心优化方法,在不增大布阵区域的前提下,增加了布阵自由度,为阵列性能进一步优化提供了基础。基于圆心松弛的圆环格点阵,提出一种满足给定无混叠视场范围和空间角分辨率要求的广义圆环格点阵设计方法。基于广义圆环格点阵,当给定阵元数时,依据阵列退化因子优化灵敏度。仿真结果表明:优化后的阵列具有更高的辐射测量灵敏度。